Skip to content
FireSafe
Canterbury-Bankstown

Fire Protection Bankstown

Bankstown is four markets wearing one council's name. Milperra, Condell Park and Revesby run on workshops, warehouses and the aviation precinct. The CBD runs on apartment towers over retail along Chapel Road. Campsie, Lakemba and Punchbowl carry dense low-rise retail where the occupant load would surprise anyone judging by the height of the building.

Light aircraft hangars at a general aviation airport in south west Sydney
  • AS1851-2012 sets the frequency for each measure, so the compliance calendar is itemised.
  • Findings written up and issued once the technician leaves site.
  • Australian family owned since 2010 and independently run.
  • Silver member, Fire Protection Association of Australia.

Same council, often the same postcode, and almost nothing in common between them.

E-bikes and e-scooters charging in a Sydney apartment car park, a lithium battery fire risk

What shapes fire protection work in Bankstown?

Aviation and heavy workshop. Hangars and engineering workshops around Bankstown Airport carry fuel and solvents, so the fire load is concentrated and the extinguisher class matters more than the floor area.

The CBD moving upward. Towers replacing low-rise commercial bring long schedules and a committee on the receiving end of the report.

Two councils inside one. Bankstown City and Canterbury each kept their own consent records and their own phrasing on schedules. Two buildings a street apart can carry documents written to different conventions, and neither is wrong.

Which fire protection services are available in Bankstown?

Maintenance and inspection

Every measure at its own cycle, with the industrial load on fire extinguishers, fire hose reels, hydrants and pump sets and sprinkler systems.

Annual fire safety statements

Assessed against the schedule and prepared for Canterbury-Bankstown Council. AFSS Sydney

Inspection and order response

Examined against the building’s own schedule, including where a council has issued an order and the clock is running. council fire safety order

Technician inspecting a fire damper inside HVAC ductwork during a fire damper inspection in Sydney

What does FireSafe cover around Bankstown?

  • Bankstown CBD
  • Bankstown Airport
  • Milperra
  • Condell Park
  • Revesby
  • Padstow
  • Panania
  • East Hills
  • Belmore
  • Campsie
  • Lakemba
  • Punchbowl
  • Wiley Park
  • Chester Hill
  • Yagoona

The airport and Milperra precinct is hangar and workshop work. Revesby and Condell Park are small-unit factory. Campsie, Lakemba and Punchbowl are strip retail where one tenancy can hold a large crowd in a small footprint. Coverage for the rest of Sydney is on the areas we service page, and the closest neighbouring pages are Liverpool, Surry Hills and Parramatta.

What compliance rules apply in Bankstown?

Council

Canterbury-Bankstown, formed in 2016 from the former Bankstown and Canterbury councils.

Lodgement

Where the consent came from either predecessor, the successor council now receives the statement.

Assessment

Requirements, including whether a practitioner is needed, are confirmed before the engagement opens rather than at lodgement.

Technician inspecting a wheeled extinguisher inside an aircraft maintenance hangar

What a hangar schedule actually tests

Aviation and heavy workshop premises get assessed on different priorities to a warehouse. The fire load is concentrated rather than spread, so what is stored decides which extinguisher class is required and where it has to sit. Hot work creates ignition risk in the same space as stored flammables, which is a combination a general checklist does not capture.

The recurring findings are extinguishers specified for the wrong class because a tenancy changed what it stores, reels obstructed by equipment that arrived later, and bunding or drainage that was never part of the fire assessment but decides how a spill behaves. Short schedules, dense detail.

Frequently asked questions

Our building was approved under the old Bankstown council. Does anything change?

The obligation is unchanged. Canterbury-Bankstown now receives the statement.

Can you service a hangar or engineering workshop?

Yes, and those are assessed on fire load and ignition risk rather than floor area alone.

Do you do extinguisher servicing on its own?

Yes, priced per unit, with the scope set out in what fire extinguisher servicing costs.

First step

Send the address, the building type and the schedule if you have one. FireSafe will confirm whether this is routine inspection, an AFSS assessment or a response to an order.

1300 347 372 sales@firesafe-au.com Unit 5/53 Governor Macquarie Drive, Chipping Norton NSW 2170
Call Get a quote