Skip to content
FireSafe
Guide

Fire Safety Schedule Explained: What It Is and How to Read Yours

By FireSafe AU Updated 6 min read

Building manager and fire safety practitioner reviewing floor plans and a schedule

Every obligation in this area traces back to one document, and most owners have never read it.

The schedule is not a maintenance record and it is not the annual statement. It is the specification. It says what the building was required to have, and to what standard.

What is a Fire Safety Schedule?

It is a document issued with a building’s development consent, listing the essential fire safety measures for that building and the standard each measure must meet.

It exists so that a building’s fire safety obligations are specific rather than general. Instead of “the building must be fire safe”, the schedule says which measures, to what standard, and therefore what has to be maintained and what has to be assessed each year.

Where does it come from?

From the consent authority, generally the council that granted the development consent, and it is attached to that consent.

That origin matters for two reasons. It means the schedule is tied to a specific approval, so a later alteration, change of use or tenancy amalgamation can make it out of date. And it means that when councils amalgamated in 2016, the successor council inherited both the consents and the schedules.

Buildings approved before amalgamation often carry a schedule issued under a council name that no longer exists. That does not invalidate it, but it does mean the historical paper trail needs care. The process for an order arising from a schedule is in council fire safety order.

What does it actually list?

Two things for each entry: the essential fire safety measure, and the standard it must meet.

An example entry reads as a measure, such as fire extinguishers or an automatic fire detection and alarm system, alongside the standard, which might be a numbered Australian Standard or a performance requirement.

That pairing is the whole point. The measure without the standard is ambiguous, because two buildings can both have fire extinguishers to entirely different specifications.

How do you read it?

Four steps.

Identify every measure listed. Some schedules are short, some run to dozens of entries, particularly in high-rise and mixed-use buildings.

Note the standard against each. That standard is what any assessment is measured against.

Compare against the building as it stands. Is each listed measure present? Has anything changed since the consent was issued?

Check for measures you know exist but are not listed. A measure installed later and never added to the schedule is a gap worth raising, because it may not be being maintained or assessed.

That fourth step is where most schedules turn out to be out of date. Buildings change; schedules often do not.

Why do schedules go out of date?

Three reasons, and all are routine building activity rather than negligence.

Alterations and additions. A new fit-out, an extension, a new tenancy, each of which may introduce or remove measures without anyone revisiting the schedule.

Changes of use. A building approved as commercial now carrying residents, or the reverse. That can change the classification and the measures required.

Amalgamations and subdivisions. Tenancies combined into one floor or one floor split into several, with shared measures now serving something different.

None of that is unusual. The problem is that the schedule is the specification, and a specification that no longer describes the asset is a poor basis for compliance.

How does it relate to servicing and the annual statement?

Three documents, three jobs.

The Fire Safety Schedule says what measures the building must have and to what standard.

AS1851-2012 decides how often each of those measures is serviced. That is explained in AS1851-2012 explained.

The annual fire safety statement is the yearly declaration that each measure on the schedule has been assessed and still performs. The process is in the AFSS guide for NSW, and what it costs is covered in annual fire safety statement cost.

The schedule is the foundation. If it is wrong, the other two are answering the wrong question.

What if you cannot find your schedule?

Three places to look, in order.

The council that issued the development consent. If the building predates an amalgamation, the successor council.

The building’s own records, if a previous managing agent or owner held them.

The Fire Safety Certificate or the previous year’s annual statement, both of which reference the schedule’s measures and can help reconstruct it.

If none of those produce it, establishing what the building is required to maintain becomes the first task, ahead of any servicing or statement work. That reconstruction is covered in fire safety audit, inspection and statement.

Who assesses against it?

Each measure is assessed against the standard the schedule specifies. Where a competent fire safety practitioner is required for that assessment, it depends on the building class and the measures involved, and it is confirmed at the start of an engagement rather than at lodgement.

Frequently asked questions

What is a Fire Safety Schedule?

The document attached to a building’s development consent listing the essential fire safety measures the building must maintain and the standard each must meet.

Where do I get a copy?

From the council that issued the development consent, or the successor council where they have amalgamated, or from the building’s own records.

Is it the same as the annual fire safety statement?

No. The schedule is the specification of what the building must have. The statement is the yearly declaration that those measures have been assessed and perform.

Why does the schedule matter if I maintain everything anyway?

Because it defines what everything means for that building. Maintaining measures that are not on the schedule, or missing measures that are, are both problems the schedule exposes.

Can a schedule be out of date?

Yes, and commonly is. Alterations, changes of use and tenancy changes can all leave a schedule describing a building that no longer exists.

What happens if a measure on the schedule is missing?

It is a compliance gap. The measure should be restored or the schedule corrected through the proper process, and that is best established before the statement falls due rather than after.

Who decides if a competent fire safety practitioner is needed?

It depends on the building class and the measures. The requirement is confirmed at the start of an engagement rather than discovered at lodgement.

Does the schedule change when a building changes hands?

No. The obligation transfers with the building, and the schedule goes with it.

Written by FireSafe AU. Australian family owned since 2010 and a Silver Member of the Fire Protection Association of Australia. Testing, inspection and maintenance to AS1851-2012 across Sydney.

Move the inspection before the statement is due

Send the address and the Fire Safety Schedule. We will confirm what the building needs and when.

Call Get a quote