Skip to content
FireSafe
Guide

Fire Evacuation Procedures in the Workplace: What Australian Buildings Are Required to Have

By FireSafe AU Updated 9 min read

Fire evacuation procedures in Australian workplace with employees evacuating through emergency exit

Most workplaces in Australia have a fire extinguisher on the wall and an exit sign above the door. Fewer have a documented fire evacuation procedure that meets the requirements of the Work Health and Safety Regulation 2017. The gap between having a general sense of what to do in a fire and having a legally compliant, documented, and practised evacuation procedure is wider than most building managers realise, and it is exactly the gap that a WorkSafe inspector or insurer will examine first after an incident.

A fire evacuation procedure is not the same as an emergency plan, and it is not the same as a fire warden training programme. It is a standalone document with defined content requirements, a defined review frequency, and a defined drill schedule. Getting it wrong, or not having one at all, exposes the person conducting a business or undertaking to serious penalties under the WHS Act 2011.

In this guide, FireSafe AU explains what a compliant fire evacuation procedure must contain under the WHS Regulation 2017 and AS3745, how it differs from the other fire safety documents your building must maintain, how often drills must be conducted, and the most common gaps we find in Sydney commercial buildings. For a broader understanding of your building’s ongoing fire safety obligations, visit our fire safety inspections guide.

What is a fire evacuation procedure and is it legally required?

A fire evacuation procedure is a documented plan that describes how occupants of a building will evacuate safely in the event of a fire or fire alarm. It covers the full sequence of actions from the moment an alarm sounds through to all occupants being accounted for at the designated muster point.

Under the Work Health and Safety Regulation 2017, a person conducting a business or undertaking with management or control of a workplace must ensure that emergency plans are prepared and maintained. Fire evacuation procedures are a core component of that emergency plan. The requirement applies to virtually every commercial, industrial, and institutional workplace in NSW: offices, warehouses, retail premises, schools, healthcare facilities, and strata-managed commercial buildings.

The obligation is not met by displaying an evacuation diagram on the wall. The diagram is one element of the procedure, not the procedure itself. If you are unsure whether your building’s fire safety documentation is complete, contact the FireSafe AU team for a compliance review.

What must a fire evacuation procedure include?

A compliant fire evacuation procedure under AS3745 and the WHS Regulation must address:

The alarm response sequence: What happens the moment an alarm sounds. Who confirms the alarm is genuine, what the first action steps are, and how the decision to evacuate is made and communicated to all building occupants.

Named responsible persons: The procedure must identify specific individuals, not just job titles, who hold key roles in the evacuation. When those individuals leave the organisation, the procedure must be updated. A procedure that names a position without naming a current person is unenforceable from the moment that position changes hands.

Evacuation routes: Primary and secondary evacuation routes from each area of the building, including alternative routes where a primary exit is blocked. Routes must be shown on the current evacuation diagram posted at key locations throughout the building and must reflect the current floor layout. This is particularly important in buildings that have undergone fit-out works.

Muster point location: The designated muster point must be identified by specific location, not described generically as “outside the building.” It must be a safe distance from the building, must not obstruct emergency vehicle access, and must have a defined method for preventing evacuees from dispersing before the headcount is complete.

Accounting for all occupants: The procedure for confirming all occupants, including visitors, contractors, and people requiring mobility assistance, have evacuated and are accounted for at the muster point.

Communication with emergency services: When and how Fire and Rescue NSW is contacted, whether the building has automatic alarm monitoring, and what information is provided to the brigade on arrival.

Provisions for people requiring assistance: Specific procedures for occupants who cannot use the stairs unassisted. This includes personal emergency evacuation plans for known individuals and a general procedure for unknown visitors and contractors who may be in the building.

Post-evacuation procedure: When and how the all-clear is given, who authorises re-entry, and what happens if the building cannot be safely re-entered.

What is the difference between a fire evacuation procedure and an emergency plan?

An emergency plan under the WHS Regulation covers all foreseeable emergency scenarios for the specific workplace: fire, medical emergency, bomb threat, chemical spill, and any others relevant to that location’s risk profile. The fire evacuation procedure is one component of the emergency plan, specifically addressing fire and fire alarm events.

AS3745, Planning for Emergencies in Facilities, provides the detailed framework. It distinguishes between the emergency plan as the overarching document, emergency procedures as the specific action sequences for each scenario, and the emergency planning committee as the group responsible for developing and maintaining both.

A building that has an emergency plan but has not reviewed it in three years, or where named responsible persons have left and the document has not been updated, does not have a compliant emergency plan regardless of what the document says. For information on the trained personnel who form part of your evacuation structure, see our fire warden training guide.

How often must a fire drill be conducted in a workplace?

AS3745 requires drills at intervals sufficient to ensure all occupants are familiar with the evacuation procedure. For most commercial workplaces the minimum practical frequency is once per year. High-risk or high-occupancy buildings, including healthcare facilities and large commercial towers, benefit from more frequent drills, particularly where staff turnover is high or shift patterns mean some staff would never participate in a single annual drill.

Every drill must be documented. The record must include the date and time, the number of occupants present, the total evacuation time, issues identified during the drill, and the corrective actions agreed upon following those issues. A drill that is not documented did not happen from a compliance perspective. If a WorkSafe inspector requests evidence of drill history and no records exist, the person conducting a business or undertaking is treated as if no drills were ever conducted.

What are the most common gaps in workplace fire evacuation procedures in Sydney?

  1. Outdated evacuation diagrams. A tenancy fit-out changes floor layouts, adds partition walls, and relocates fire exits. The evacuation diagram on the wall still shows the pre-fit-out floor plan.

Occupants following it during an actual evacuation encounter walls where corridors used to be. Every structural change to a tenancy must trigger a diagram update before the space is reoccupied.

  1. No procedure for people requiring assistance. The procedure assumes all occupants can use stairs unassisted. Any building with a known non-ambulant regular occupant must have a specific, named procedure for that person, including which staff member is responsible for their evacuation on each shift.
  2. Inadequate muster point. The designated muster point is directly in front of the building entrance, blocking brigade vehicle access. Or it is on a public footpath with no way to prevent evacuees dispersing before the headcount is complete. A muster point must be large enough to accommodate all potential occupants and clearly signed.
  3. Procedure not reviewed after building changes. The WHS Regulation requires the emergency plan to be reviewed following any change to the workplace that could affect its adequacy. A new tenancy, relocated fire exit, changed occupant numbers, or new fire protection equipment each trigger a review obligation.
  4. No drill records. Training may have occurred but records were not kept. Without dated records showing participation numbers, evacuation time, and identified issues, the drill cannot be evidenced in a WorkSafe inspection or an insurance investigation.

FireSafe AU can assess your building’s current evacuation procedure against AS3745 and the WHS Regulation 2017. Contact our team to arrange a compliance review.

Book Your Fire Evacuation Procedure Review With FireSafe AU

FireSafe AU provides fire safety compliance assessments across Sydney for commercial, industrial, strata, and institutional buildings. Our team reviews existing evacuation procedures against AS3745 and the WHS Regulation, identifies gaps, and provides a written report with specific recommendations.

We also assist with drill facilitation and the preparation of compliant emergency plans for buildings that do not currently have one in place. View our full range of fire safety services or contact us today to arrange your evacuation procedure review.

Contact FireSafe AU

Frequently Asked Questions: Fire Evacuation Procedures in the Workplace

Is a fire evacuation procedure legally required for all workplaces in Australia?

Yes. The WHS Regulation 2017 requires every person conducting a business or undertaking with management or control of a workplace to prepare and maintain an emergency plan. Fire evacuation procedures are a mandatory component of that plan and apply to commercial, industrial, retail, healthcare, educational, and institutional workplaces.

How often must a fire evacuation procedure be reviewed?

AS3745 requires the plan and its procedures to be reviewed at least annually and following any change to the workplace that could affect its adequacy. Changes that trigger an unscheduled review include fit-out works, changes in occupant numbers, relocation of exits, and any change to named responsible persons.

What is the penalty for not having a fire evacuation procedure?

Under the WHS Act 2011, failure to maintain a compliant emergency plan is a Category 3 offence at minimum, carrying penalties of up to $500,000 for a body corporate. Where reckless conduct is involved the penalty rises to $3,000,000 for a body corporate.

Does the evacuation diagram need to be displayed throughout the building?

Yes. The current evacuation diagram must be displayed at warden stations and at key locations throughout the building. The full procedure document must be accessible to responsible persons and available for inspection at any time.

What should happen immediately after a fire drill?

Document the drill: date, time, number of occupants, evacuation time, and all issues identified. Debrief with responsible persons. Record agreed corrective actions and implement them before the next drill. The debrief record is part of the drill documentation.

Does the evacuation procedure need to address after-hours occupancy?

Yes. If the building is occupied outside standard business hours, the procedure must address who holds the responsible person role during those periods and how occupant numbers are accounted for when attendance is lower and less predictable.

Written by FireSafe AU. Australian family owned since 2010 and a Silver Member of the Fire Protection Association of Australia. Testing, inspection and maintenance to AS1851-2012 across Sydney.

Move the inspection before the statement is due

Send the address and the Fire Safety Schedule. We will confirm what the building needs and when.

Call Get a quote